An administrator is configuring admission control settings for a vSphere HA cluster. The administrator selects the option Allow VMs to Be proved on even They Violate Availability Constraints Which two events occur during an ESXi host failure? (Choose two)

An administrator is configuring admission control settings for a vSphere HA cluster. The administrator selects the option Allow VMs to Be proved on even They Violate Availability Constraints
Which two events occur during an ESXi host failure? (Choose two) 







A. Only virtual machines with a high restart priority are restarted on surviving ESXi hosts.
B. vSphere HA cannot guarantee that all virtual machines from a failed host will be restarted.
C. vSphere HA restarts virtual machines on surviving ESXi hosts with the most unreserved capacity.
D. Virtual machines can be powered on until the percentage of cluster resources reaches 25 percent.






Answer: A,B

An administrator is troubleshooting an ESXi 5.x host and needs to export diagnostic information. The host is currently managed by a vCenter Server instance. Which two ways can the information be gathered using the vSphere Client? (Choose two)

An administrator is troubleshooting an ESXi 5.x host and needs to export diagnostic information.
The host is currently managed by a vCenter Server instance.
Which two ways can the information be gathered using the vSphere Client? (Choose two) 




A. In the vSphere Client, select the affected ESXi host. Right-click the host and select export Diagnostic data. Select a location the location and click OK.
B. Select Home, Under Administration, click System Logs and click the export systemLogs button. Select the effected ESXi host. Select ??Select All??. Select a location and click Finish.
C. Select Home, Under Administration, click System Logs and select the affected ESXI host. Right-click the host and select Export Diagnostic Data. Select a location and click OK.
D. In the vSphere Client, select the affected ESXi host. Select File, Export and Export System Logs. Select a location and click Finish.






Answer: B,D

Click the exhibit button. ACME Logging Inc. has been using the vSphere Web Client template to five-node vSphere 5 cluster. After deploying a new template, the resulting virtual machine is not able to connect the deployment network to which it was assigned. When deploying another template, the message in the exhibit is shown. Based on the information, what is the likely problem?

Click the exhibit button.
ACME Logging Inc. has been using the vSphere Web Client template to five-node vSphere 5 cluster. After deploying a new template, the resulting virtual machine is not able to connect the deployment network to which it was assigned. When deploying another template, the message in the exhibit is shown.
Based on the information, what is the likely problem? 




A. Host esxi2 does not have > network uplink attached to the Production vSwitch.
B. Host esxi2 does not have the Production network created to bind to.
C. DRS must be enabled if you are deploying templates into a cluster.
D. A vDS must be configured it you are deploying templates into a cluster.






Answer: B

An administrator would like to have vCentre take action any time a virtual machine is using over 90% of its available resources for five minutes or longer. Which three actions can be taken by vCenter Server in response to the trigger without running a script? (Choose three)

An administrator would like to have vCentre take action any time a virtual machine is using over 90% of its available resources for five minutes or longer.
Which three actions can be taken by vCenter Server in response to the trigger without running a script? (Choose three) 






A. Increase Virtual Machine Memory
B. Reboot Guest on VM
C. Send notification trap (SKMP)
D. Increase Virtual Machine CPU Shares
E. Send notification email (SMTP)







Answer: B,C,E

Click the Exhibit button. Assuming that this is the only virtual machine and the only resource pool, what is the maximum amount of memory that can be configured for use by the virtual machine that is part of the finance resource pool?

Click the Exhibit button.
Assuming that this is the only virtual machine and the only resource pool, what is the maximum amount of memory that can be configured for use by the virtual machine that is part of the finance resource pool? 




A. 16,384 MB, less virtual machine overhead
B. 57 MB less virtual machine overhead
C. 3,009 MB, less virtual machine overhead
D. 1 3,375 MB, less virtual machine overhead







Answer: A

A network administrator has discovered a failure that has affected accessibility to the management network As a result, none clusters are able to communicate on this network. The cluster was configured with default settings. What happens as a result of the failure?

A network administrator has discovered a failure that has affected accessibility to the management network As a result, none clusters are able to communicate on this network. The cluster was configured with default settings.
What happens as a result of the failure? 







A. The VMs will be powered off on slave hosts in the cluster.
B. All VMs on all hosts in the cluster are unaffected.
C. The VMs will be powered off on slave hosts that cannot communicate with the master on the affected network.
D. The VMs will be powered down on all hosts in the cluster





Answer: A

An administrator has been tasked with creating a vSphere Standard Switch (vSS) for an ESXi host with the following specifications: 116 virtual machines will be connected to the switch, The switch wall have four uplinks configured for port-based load balancing. The switch will act as a secondary heartbeat network for HA. Which two statements are true about this configuration? (Choose two)

An administrator has been tasked with creating a vSphere Standard Switch (vSS) for an ESXi host with the following specifications:
116 virtual machines will be connected to the switch,
The switch wall have four uplinks configured for port-based load balancing.
The switch will act as a secondary heartbeat network for HA.
Which two statements are true about this configuration? (Choose two) 






A. The configuration requires a Service Console Port
B. The configuration requires a VMkernel Port
C. A vSS created with default settings in the vSphere Client is insufficient for this configuration
D. A vSS created with 128 ports using the vSphere CLI is sufficient for this configuration




Answer: B,C

A company runs several instances of an application that requires large amounts of memory. Which three metrics are checked to diagnose a memory bottleneck at the ESXi host level? (Choose three)

A company runs several instances of an application that requires large amounts of memory.
Which three metrics are checked to diagnose a memory bottleneck at the ESXi host level? (Choose three) 








A. MEMSZ
B. MEMCTL
C. SWAP
D. ZIP
E. MCILTGT






Answer: A,B,C

An administrator is performing maintenance on a storage array used by a DRS cluster. The administrator wants to disable alarm actions for the cluster while the maintenance is taking place. What procedure will accomplish this task?

An administrator is performing maintenance on a storage array used by a DRS cluster. The administrator wants to disable alarm actions for the cluster while the maintenance is taking place.
What procedure will accomplish this task? 






A. Go to the alarms tab for each ESXi host in the DRS cluster. Locate storage-related alarms. Right click and disable each alarm
B. Right-click the DRS cluster and select Alarm and Disable Alarm Actions
C. Right-click the datacenter containing the DRS cluster. Select Alarm Disable Alarm Actions
D. Go to the alarms tab for the datacenter containing DRS cluster. Locate the storage-related alarms. Right-click and disable each alarm






Answer: B

What are two ways to enable remote tech support mode (SSHA on an ESXi 5.x host? (Choose two)

What are two ways to enable remote tech support mode (SSHA on an ESXi 5.x host? (Choose two) 








A. Through the Security Profile pane of the Configuration tab m the vSphere Client
B. Through the Direct Console User Interface (DCUI)
C. Through the Advanced Settings pane of the Configuration tab in the vSphere Client
D. Through the Networking pane of the Configuration tab in the vSphere Client







Answer: A,B

An administrator is attempting to deploy a virtual machine from an existing template, but deploy Virtual Machine from this template menu option is unavailable. What are two reasons this issue would occur? (Choose two)

An administrator is attempting to deploy a virtual machine from an existing template, but deploy Virtual Machine from this template menu option is unavailable.
What are two reasons this issue would occur? (Choose two) 







A. The template has not been stored in the proper format
B. The vSphere Client is connected to an ESXi host
C. The template is listed as Orphaned
D. The administrator is using the vSphere Web Client






Answer: A,B

To uplink a Hardware FCoE Adapter, what, configuration step must be performed?

To uplink a Hardware FCoE Adapter, what, configuration step must be performed? 







A. Create a vSphere Distributed Switch and add the FCoE Adapter as an uplink.
B. Enable the FCoE service and select the newly installed adapter.
C. Create a vSphere Standard Switch and add the FCoE Adapter as an uplink.
D. No configuration is I equaled. The adapter will appear to the host as a Fibre Channel Adapter.






Answer: C

An administrator is installing a vCenter Server instance to manage 10 ESXi hosts and 100 machines. Approximately how much additional datastore capacity is required to increase the statistics collection level to maximum for all collection periods, compared to a standard installation?

An administrator is installing a vCenter Server instance to manage 10 ESXi hosts and 100 machines.
Approximately how much additional datastore capacity is required to increase the statistics collection level to maximum for all collection periods, compared to a standard installation? 









A. 6GB
B. 9GB
C. 3GB
D. 1GB






Answer: B

Click the Exhibit button. Based on the exhibit, what is the appropriate action to disable a path?

Click the Exhibit button.
Based on the exhibit, what is the appropriate action to disable a path? 




A. Paths cannot be disabled in this interface.
B. Right-click the path you want to disable and then select Disable
C. Click, the path you want to disable then press Delete
D. Double-click the new path you wish to make active. The existing path will be disabled







Answer: B

A new LUN has been presented to two ESXi hosts: ESXiA and ESXiB. The LUN can be seen from both servers. A vSphere Client attached to ESXiB is used to create a VMFS datastore on the LUN. The new datastore is visible on ESXiB but not on ESXiA. Which step must be taken to make the datastore visible to ESXiA?

A new LUN has been presented to two ESXi hosts: ESXiA and ESXiB. The LUN can be seen from both servers. A vSphere Client attached to ESXiB is used to create a VMFS datastore on the LUN.
The new datastore is visible on ESXiB but not on ESXiA.
Which step must be taken to make the datastore visible to ESXiA? 






A. Perform a rescan operation on ESXiB.
B. Reboot ESXiA.
C. Perform a rescan operation on ESXiA
D. Modify LUN masking settings on the storage array.






Answer: C

Which two conditions must exist on all hosts in the cluster if Enhanced vMotion Compatibility (EVC) is used? (Choose two)

Which two conditions must exist on all hosts in the cluster if Enhanced vMotion Compatibility (EVC) is used? (Choose two) 





A. The hosts must all run the same vSphere version.
B. The hosts must have the NX/XD feature enabled m BIOS.
C. The hosts must all belong to the same CPU family.
D. The hosts must all be part of the same DRS Group.







Answer: C,D

An administrator has purchased a new 10GB Converged Network Adapter (CNA) for installation in system that is running ESXi 5.x. the administrator has downloaded the latest driver from the hardware vendor and wants to include the driver in an image. The image profile acceptance level is set to VMwareSupported. Which acceptance level could the driver have and still be included in the image? (Choose two)

An administrator has purchased a new 10GB Converged Network Adapter (CNA) for installation in system that is running ESXi 5.x. the administrator has downloaded the latest driver from the hardware vendor and wants to include the driver in an image. The image profile acceptance level is set to VMwareSupported.
Which acceptance level could the driver have and still be included in the image? (Choose two) 





A. PartnerSupported
B. VMwareAccepted
C. CommunitySupported
D. VMwareCertified






Answer: B,C

A datastore administrator has requested that a virtual disk attached to a virtual machine running an I/O intensive database application be fully provisioned. The virtual disk was initially thin provisioned. Which two methods would accomplish this task? (Choose two)

A datastore administrator has requested that a virtual disk attached to a virtual machine running an I/O intensive database application be fully provisioned. The virtual disk was initially thin provisioned. Which two methods would accomplish this task? (Choose two) 







A. Use Storage vMotion and change the disk type to Flat.
B. Use the Inflate option in the Datastore Browser.
C. Use the Inflate option in the Datastore Properties.
D. Use Storage vMotion and change the disk type to Thick.







Answer: B,D

A user attempts a remote SSH connection to a newly installed ESXi 5.x host to execute some commands. The SSH connection attempts fails, through the user is able to receive a ICMP ping back from the host. Which two connections might cause the issue? (Choose two)

A user attempts a remote SSH connection to a newly installed ESXi 5.x host to execute some commands. The SSH connection attempts fails, through the user is able to receive a ICMP ping back from the host.
Which two connections might cause the issue? (Choose two) 






A. The shell timeout is set too low.
B. The ParentRootLogin option is set to False.
C. The SSH service is disabled on the host by default.
D. The ESXi firewall blocks the SSH protocol by default.







Answer: A,C

An administrator receives a complaint that a virtual machine is performing poorly. The user attributes the issue to poor storage performance. IF the storage array is the bottleneck, which two counters would be higher than normal? (Choose two)

An administrator receives a complaint that a virtual machine is performing poorly. The user attributes the issue to poor storage performance.
IF the storage array is the bottleneck, which two counters would be higher than normal? (Choose two) 







A. Average device latency per command, in milliseconds (DAVG per cmd)
B. Average ESXi VMKernel latency per command, in milliseconds (KAVG per cmd)
C. Average virtual machine operating system latency per command, in milliseconds (GAVG per cmd)
D. Number of SCSI reservation conflicts per second (CONS per second)







Answer: A,D

Under which two situations does the dead space reclamation feature VAAI Thin Provisioning offer the ability to reclaim blocks of a thin provisional LUN on a array? (Choose two)

Under which two situations does the dead space reclamation feature VAAI Thin Provisioning offer the ability to reclaim blocks of a thin provisional LUN on a array? (Choose two) 






A. When a virtual machine is migrated to a different datastore.
B. When a guest OS files in a virtual disk are deleted.
C. When a virtual machine is migrated to a different host.
D. When a virtual disk is deleted.





Answer: A,D

Which tool defines the Image Profiles used with Auto Deploy?

Which tool defines the Image Profiles used with Auto Deploy? 








A. The vSphere Client via the Image Profiles management plug-in
B. The vSphere Power CLI image builder cmdlet
C. The vSphere CLI esxcfg-image utility
D. The vSphere CLI esxcli image add command






Answer: B

Which resource management technique can be used to relieve a network bottleneck by a virtual machine with occasional high outbound network activity?

Which resource management technique can be used to relieve a network bottleneck by a virtual machine with occasional high outbound network activity? 







A. Apply traffic shaping to the port group that contains the virtual machine.
B. Convert traffic shaping from a nNetwork Standard Switch to a vNetwork Distributed Switch.
C. Apply traffic to the other virtual machines in the same port group.
D. Apply traffic to the virtual machine with high activity.






Answer: A

Click the exhibit button. Based on the exhibit, what is the reason that none of the paths are marked as preferred?

Click the exhibit button.
Based on the exhibit, what is the reason that none of the paths are marked as preferred? 




A. A preferred path has been selected, but the Refresh button must be pressed to reflect the change.
B. A preferred path cannot be selected.
C. A preferred path has not been chosen.
D. A preferred path has not been chosen because insufficient Active paths exist






Answer: A

An existing vSphere environment will be upgraded to vSphere 5. The current implementation utilizes ESX 4.1 and the new implementations will ESXi 5.x. In which two ways will the new ESXi 5.x implementation differ from ESX 4.1 implementation? (Choose two)

An existing vSphere environment will be upgraded to vSphere 5. The current implementation utilizes ESX 4.1 and the new implementations will ESXi 5.x.
In which two ways will the new ESXi 5.x implementation differ from ESX 4.1 implementation? (Choose two) 







A. VMware ESXi 5.x does not provide a host-based firewall.
B. VMware ESXi 5.x can boot from additional sources, such as a USB drive.
C. VMware ESXi 5.x does not provide local command-line management capabilities.
D. VMware ESXi 5.x can support virtual machine which larger resource configurations.






Answer: B,D

While verifying host connectivity to datastores using Topology Maps, you see that one of the hosts in a DRS/HA Cluster is framed by a pale green circle. What does this indicate?

While verifying host connectivity to datastores using Topology Maps, you see that one of the hosts in a DRS/HA Cluster is framed by a pale green circle. What does this indicate? 







A. The host has a CPU incompatibility
B. The host has a vmotion validation issue
C. The host is currently heavily utilized
D. The host currently has a low workload









Answer: B

An administrator is performing maintenance on a storage array used by a DRS cluster. The administrator wants to disable alarm actions for the maintenance is taking place. Which of the following would accomplish this task?

An administrator is performing maintenance on a storage array used by a DRS cluster. The administrator wants to disable alarm actions for the maintenance is taking place. Which of the following would accomplish this task? 







A. Right-click the DRS Cluster. Choose alarm, and then disable alarm actions.
B. Go to the alarm tab for the datacenter containing the DRS cluster. Locate any storage related alarms. Right click and disable each alarm.
C. Go the alarm tab for each ESXi host in the DRS cluster. Locate any storage related alarms. Right click and disable each alarm.
D. Right-click the Datacenter containing the DRS cluster. Choose Alarm, then disable alarm actions.







Answer: D

Which of the following VMware solutions leverages vSphere to provide on-demand access to share the reconfigure multi-tier system configurations without IT involvement?

Which of the following VMware solutions leverages vSphere to provide on-demand access to share the reconfigure multi-tier system configurations without IT involvement? 






A. VMware vCenter Life cycle Manager
B. VMware vCenter Orchestrator
C. VMware vCenter Lab Manager
D. VMware vCenter ConfigControl





Answer: C

Click the Exhibit button: An administrator has deployed a 2-node cluster with HA and DRS enabled. DRS has been configured for fully automated mode, and management and vMotion interfaces has been configured on separate physical networks. Initial DRS testing on the cluster reveals that virtual machines are not being migrated despite great disparity in resource utilization between the ESX hosts in the cluster. The image shows the error and network configuration for one the hosts. Which of the following steps, if performed, would successfully resolve this problem?

Click the Exhibit button: An administrator has deployed a 2-node cluster with HA and DRS enabled. DRS has been configured for fully automated mode, and management and vMotion interfaces has been configured on separate physical networks. Initial DRS testing on the cluster reveals that virtual machines are not being migrated despite great disparity in resource utilization between the ESX hosts in the cluster. The image shows the error and network configuration for one the hosts.
Which of the following steps, if performed, would successfully resolve this problem? 







A. Enable the Vmkernel port for vMotion.
B. Change the IP address to a valid for the VMkernel port.
C. Change the vSwitch connection to the Service Console port.
D. Disable HA for this cluster.





Answer: C

Which of the following two statements are true regarding vSphere virtual switch uplinks (Choose Two)?

Which of the following two statements are true regarding vSphere virtual switch uplinks (Choose Two)? 




A. vSphere virtual switches must be configured with at least one uplink
B. vSphere virtual switches can be configured to use the same uplink
C. Multiple vSphere virtual switches cannot be configured to use the same uplink
D. vSphere virtual switches do not need to be configured with an uplink





Answer: C,D

You have a mixture of servers in your datacenter where the CPUs are compatible in every way except that some support NX or XD bit and some do not. What should you do to minimize the effect of these differences?

You have a mixture of servers in your datacenter where the CPUs are compatible in every way except that some support NX or XD bit and some do not.
What should you do to minimize the effect of these differences? 





A. You mask the NX/XD bits on the servers that do not support the functionality.
B. No action is required, as NX/XD bits are masked by default.
C. You mask the NX/XD bits on the servers that support the functionality.
D. You mask the NX/XD bits on the virtual machines before you VMotion them.






Answer: D

Using the vSphere Client from a remote PC, an administrator needs to connect to a Virtual Machine and burn a DVD Which of the following is true about this scenario?

Using the vSphere Client from a remote PC, an administrator needs to connect to a Virtual Machine and burn a DVD Which of the following is true about this scenario? 







A. The remote client device can be used The VM must be configured for Client Device and Passthrough IDE mode.
B. The Host device must be used The VM must be configured for Host Device and Passthrough IDE mode.
C. The remote client device can be used. The VM must be configured for Client Device and Emulate IDE mode.
D. The Host device must be used. The VM must be configured for Host Device and Emulate IDE mode.






Answer: C

An administrator attempts to connect to the Web Access Service on an ESX host, but is unable to establish a connection. Which of the following commands executed from a SSH client connected to the ESX host would resolve the problem?

An administrator attempts to connect to the Web Access Service on an ESX host, but is unable to establish a connection. Which of the following commands executed from a SSH client connected to the ESX host would resolve the problem? 





A. service mgmt-vmware restart
B. service vmware-webAccess restart
C. service vmware-hostd restart
D. esxcfg-firewall -e webAccess





Answer: B

Which of the following is true regarding DRS cluster with Intel and AMD based ESX/ESXi hosts? (Choose two)

Which of the following is true regarding DRS cluster with Intel and AMD based ESX/ESXi hosts? (Choose two) 





A. VMware DRS can load balance running virtual machines using all hosts in the cluster.
B. VMware
H. will failover virtual machines to any hosts in the cluster
C. VMware FT can be configured for this cluster.
D. VMware EVC can be enabled for this cluster.






Answer: A,B

It appears that single vCPU virtual machine (VM) in a resource pool called Production is having performance problems because it does not have enough CPU resources available. Which of the following methods could be used to improve performance and reduce CPU contention of this VM while maintaining compatibility with DRS (Choose Two)?

It appears that single vCPU virtual machine (VM) in a resource pool called Production is having performance problems because it does not have enough CPU resources available.
Which of the following methods could be used to improve performance and reduce CPU contention of this VM while maintaining compatibility with DRS (Choose Two)? 





A. Increase the Share Priority setting for the Production resource pool
B. Increase the Share Priority setting for this VM
C. Configure a CPU Reservation for this VM
D. Dedicate a physical CPU to this VM






Answer: B,C